- Remove the sensor from your bottle.
- Unscrew the top screws using a small screwdriver.
- Take off the upper plastic casing carefully.
- Locate the joint red, yellow, and black wires connected to the sensor’s base.
- Gently unplug these wires from the base. (This disables the Find My feature.)
- Reassemble the sensor by reversing the steps.
- Reattach the plastic casing.
- Secure it with the screws.
Place the sensor back in your bottle.
Tools Needed: Small screwdriver
Important Notes: Be gentle with the wiring to avoid damaging other components.
If you need to restore Find My, reconnect the wires.