To reset your sensor puck, you need to unscrew the sensor puck from the bottom of the bottle, place it on a flat surface and press the Orange/Blue RESET button near the area where you connect the magnetic charging cord.
After the reset you should see three green flashes if everything is fine with the sensor puck.
- First flash checks battery - it will flash red if the battery level is below 20%. If the first flash is red, the sensor won't flash anymore. To get 3 flashes you need to charge it.
- The second flash checks orientation - if the puck is tilted it is yellow, if there is no communication with the accelerometer, then red.
- The third flash is for load cell communication, if it's bad it will flash red.
Note: After reassembling the bottle, the sensor has to be recalibrated within the app.