To reset your sensor puck, you need to unscrew the sensor puck from the bottom of the bottle, place it on a flat surface and press the Orange/Blue RESET button located near the area where you connect the magnetic charging cord.
After the reset you should see three green flashes if everything is fine with the sensor puck.
- First flash checks battery - it will flash red if the battery level is below 20%. If the first flash is red, the sensor won't flash anymore. To get 3 flashes you need to charge it.
- The second flash checks orientation - if the puck is tilted it is yellow, if there is no communication with the accelerometer, then red.
- The third flash is for load cell communication, if it's bad it will flash red.
Note: After reassembling the bottle, the sensor has to be recalibrated within the app for optimum accuracy.